This preliminary study investigates the viability of substituting high-performance Aalborg white Portland cement (CEM I 52.5 R) with five diverse industrial byproducts: wood ash, silica waste, clay brick, glass fibre, and calcined sewage sludge ash. Sewage sludge ash was produced in a laboratory from two different sludges from wastewater treatment plants in the Latvian cities of Jelgava and Liepaja. The research evaluates the influence of substitution levels ranging from 5% to 20% on the rheology of fresh material and its early-age mechanical performance (day 7). Results indicate that particle morphology largely dictates workability; porous and angular materials, such as wood ash, clay brick, and sewage sludge ash, reduce flowability, whereas non-absorbent milled glass fibres unexpectedly improve spread diameter. Regarding mechanical performance, glass fibre and clay brick waste demonstrated the highest potential, exceeding the 48–62 MPa reference compressive strengths by achieving up to 69 MPa at a 10% substitution level. Conversely, wood ash and silica waste exhibited significant strength degradation at higher substitution levels, due to agglomeration and high water demand. This approach not only identifies viable waste streams for cement substitution but also diverts significant industrial waste from landfills, thereby reducing CO2e emissions and advancing more sustainable construction practices.
Argalis et al. (Wed,) studied this question.