This paper proposes a non-overlapping planar cross-arranged ultra-wideband shared-aperture base station antenna array targeting the 2 to 6 GHz application bandwidth. The low-frequency module (double-layer parasitic coupling) and the high-frequency module (chamfered slotted patch) are independently designed, and metal baffles are introduced around the antenna elements to reshape the boundary conditions and physically block the electromagnetic coupling paths. Both simulation and experimental results demonstrate that the fabricated prototype successfully exceeds the targeted 2–6 GHz spectrum, achieving an actual continuous coverage from 1.84 to 6.3 GHz. Specifically, the antenna achieves a gain higher than 5.9 dBi in the measured low-frequency band (1.84–3.72 GHz) and higher than 6.1 dBi in the high-frequency band (3.63–6.3 GHz), with a voltage standing wave ratio (VSWR) below 2 across the entire band. The metal baffles successfully correct the high-frequency radiation pattern distortion and ensure stable directional radiation over the full operating bandwidth. This design provides an efficient, robust, and manufacturable solution for 5G offshore wind power multi-band base station antennas.
Yang et al. (Thu,) studied this question.