As the population increases, the demand for power continues to rise. As fossil fuel resources reduce, wind energy emerges as a sustainable alternative and helps address adverse effects of global warming and environmental pollution caused by fossil fuels. Thus, this study focuses on increasing the efficiency of wind turbines by improving their energy conversion. In this study, the NREL Phase VI wind turbine blade was modified by adding a Gurney flap at trailing edge along the entire span. Computational fluid dynamics simulations using ANSYS CFX 19.2 were performed on the modified blades to evaluate their aerodynamic performance. Three different flap lengths were investigated with six wind speeds varying from 5 m/s to 20 m/s. The results obtained were compared with those from NREL Phase VI original shape and a blade equipped with a winglet. Computational domain was divided into a rotating cylindrical region and a stationary rectangular part. The aerodynamic parameters calculated include torque, thrust, and normal and tangential forces coefficients. At low velocities, the addition of a Gurney flap had an insignificant impact on torque and thrust, whereas at medium to high wind speeds, significant increases were observed on torque, indicating more power production.
Hanoon et al. (Tue,) studied this question.