Los puntos clave no están disponibles para este artículo en este momento.
Abstract This paper examines the role of grasper compliance and kinematic configuration in environments where object size and location may not be well known. A grasper consisting of a pair of two-link planar fingers with compliant revolute joints was simulated as it passively deflected during contact with a target object. The kinematic configuration and joint stiffness values of the grasper were varied in order to maximize successful grasp range and minimize contact forces for a wide range of target object size. Joint rest angles around 25–45 degrees produced near-optimal results if the stiffness of the base joint was much smaller than the intermediate joint, as confirmed experimentally. Keywords: GRASPINGCOMPLIANCEUNSTRUCTURED ENVIRONMENTSMECHANISM DESIGN
Dollar et al. (Sat,) studied this question.