Unparalleled Rates for the Activation of Aryl Chlorides and Bromides: Coupling with Amines and Boronic Acids in Minutes at Room Temperature

Exceptionally fast oxidative addition of an aryl chloride (or a deactivated aryl bromide) to the active Pd0 center, which is ligated by sterically demanding phosphanes, occurs during coupling reactions catalyzed by air-stable PdI dimers as shown in the scheme. As a result, the reactions of aryl chlorides and bromides with amines and boronic acids at room temperature are complete within a few minutes. 1-Ad=1-adamantyl. Oxidative addition initiates most palladium-catalyzed cross-couplings1 and is often rate-limiting for reactions of aryl chlorides2 and deactivated aryl bromides. 3 This addition usually occurs to an unsaturated complex formed from ligand dissociation or after transformation of a precatalyst to the true catalyst. 4 Although the elementary oxidative addition step could occur to the same Pd0 intermediate and at the same rate when different catalyst precursors are used, the efficiency with which this Pd0 intermediate is generated can differ widely. For example, reactions of aryl halides with amines, boronic acids, and olefins occur at elevated temperatures when catalyzed by isolated Pd (PtBu3) 25–7 but occur at room temperature in some cases when catalyzed by a combination of Pd (dba) 2 and one equivalent of PtBu3 (dba= (E, E) -dibenzylideneacetone). 7–10 Here we describe the catalytic activity of air-stable, readily accessible, alkyl di-tert-butylphosphane ligated palladium (I) dimers toward selected couplings of amines with aryl chlorides on the time scale of minutes at room temperature. Furthermore, these dimers catalyze a range of aminations and Suzuki–Miyaura couplings of aryl bromides even more readily. In addition to providing a convenient catalyst for synthetic chemistry, these results indicate that the elementary step of oxidative addition of an aryl chloride to the reactive Pd0 intermediate ligated by PtBu3 or P (1-Ad) tBu2 (1-Ad=1-adamantyl) occurs with rates that are unparalleled for this step. 11–14 To evaluate the potential of 1 a and 1 b as catalysts for the aminations of aryl halides, we studied the prototype reaction of p-chlorotoluene with dibutylamine in the presence of sodium tert-butoxide as base and 0. 5 mol % of 1 b in toluene at room temperature. This reaction was complete within 15 min and formed N, N-dibutyl-p-toluidine in 86 % yield of isolated product. The reaction occurred at a similar rate and in a higher 95 % yield when conducted in THF, most likely because of the greater solubility of 1 b in THF. Although the combination of Pd (dba) 2 with carbene 218 and the combination of Pd (OAc) 2 with biphenylyl phosphane 319 have been used for amination of aryl chlorides at room temperature, reactions catalyzed by these species required longer times at higher catalyst loadings. 201 Table 1 summarizes results on the room-temperature amination of aryl chlorides and bromides catalyzed by palladium (I) dimers 1 a and 1 b. All of these reactions, except that in entry 11, were quenched after 15 min. In some cases, reactions catalyzed by 1 a gave higher conversions with 1 mol % catalyst. For example, the reaction of cyclic secondary amines with p-chlorotoluene occurred to only 88 % completion after 15 min when catalyzed by 1 b, but to full completion when catalyzed by the 1 a (entry 2). Higher activity of 1 a was also observed for the amination of o-substituted aryl chlorides. The reaction of o-chlorotoluene with morpholine gave the desired product in 84 % yield in the presence of 1 a, but only 68 % yield in the presence of 1 b (entries 3 and 4). Most often, additional reaction time at room temperature did not increase conversion when the reactions were incomplete after 15 min. This result implies that high activity of these catalysts is obtained at the expense of stability. Entry Catalyst Aryl halide Amine Product Yield %b 1 1 b 1 1 1 88 2 1 a 92 3 1 a 1 1 1 84 4 1 b 68 5 1 b 1 HNBu2 1 87 6 1 a 1 HNBu2 1 93 7 1 b 1 HNBu2 1 97 8 1 b 1 HNBu2 1 >99 9 1 b 1 HNBu2 1 96 10 1 a 1 HNMePh 1 98 11c 1 b 1 HNPh2 1 96 12 1 a 1 H2NPh 1 89 13 1 b 82 Aryl chlorides with varied electronic properties reacted with dialkyl amines to give the coupled product within 15 min. Deactivated (entry 5) and electron-deficient (entries 6–8) chloroarenes were converted to the desired amine in high yield within 15 min. Because of the short reaction time, the process tolerated functional groups, such as nitro groups, that are typically unstable when the aminations are conducted with NaOtBu as base. Although 1 a and 1 b displayed high activity for the amination of aryl chlorides at room temperature with dialkylamines, the scope of this fast room-temperature chemistry is narrower than the slower room-temperature chemistry with some other catalysts. 11, 21 For example, no reaction of p-chlorotoluene with diphenylamine or primary amines occurred at room temperature with these dimers as catalyst. These palladium dimers, 1 a and 1 b, also catalyzed aminations of unactivated aryl bromides (entries 9–13) with remarkable rates. Each reaction that occurred with an aryl chloride substrate also occurred with the corresponding aryl bromide. In addition, reactions of aryl bromides with diarylamines occurred in high yield (entry 11), though these reactions were faster when catalyzed by the combination of Pd (dba) 2 and PtBu3. To explore the versatility of catalysts 1 a and 1 b, we examined their activity toward Suzuki–Miyaura reactions. Catalyst 1 a induced couplings of various aryl bromides, such as p-bromotoluene, o-cyano-, o-trifluoromethyl-, and o-methoxybromobenzene, with phenylboronic acid at similarly fast rates at room temperature (Table 2). o-Substituted aryl bromides (entries 2–4) were as reactive as p-bromotoluene (entry 1) in the presence of dimer 1 a. Even the more hindered 2-bromo-m-xylene coupled with phenylboronic acid within minutes in 84 % yield (entry 5). Reactions of phenyl boronic acids with deactivated aryl chlorides at room temperature occurred rapidly, but did not exceed 70 % conversion. Entry R1 R2 R3 Yield %b 1 H H CH3 95 2 CN H H 92 3 CF3 H H 90 4 OCH3 H H 96 5 CH3 CH3 H 84 Preliminary mechanistic studies of amination reactions catalyzed by 1 a suggest that oxidative addition is rate limiting, even with these short reaction times. The rates for reaction of aryl bromides and chlorides were measured at −20 °C and 0 °C, respectively. Loadings of 20 mol % were required to obtain full conversion of aryl chlorides at 0 °C. Catalyst decomposition and the observation of several 31P NMR signals corresponding to palladium complexes we have not been able to identify made detailed kinetic studies unwarranted. However, reactions conducted with varying concentrations of aryl chloride clearly showed the reaction to be first order in this reagent. In contrast to reactions catalyzed by the disphosphane complex Pd (PtBu3) 2, 6 the concentration of base did not influence the reaction rate. In conclusion, air-stable palladium dimers PdBr (PRtBu2) 2 are active as catalysts for reactions of various aryl chlorides or bromides and amines that proceed within minutes at room temperature. The fast rates of these reactions show that the proper choice of catalyst precursor can allow the overall rate to approach that for the elementary step of oxidative addition and that the elementary oxidative addition of an aryl chloride can be remarkably fast, even at room temperature. This fast rate for PtBu3-ligated Pd0 creates the highest turnover frequencies for cross-couplings of aryl chlorides. 1 a: Pd (dba) 2 (288 mg, 0. 50 mmol) and P (1-Ad) PtBu222 (560 mg, 2. 00 mmol) were stirred in toluene (15 mL) in a vial for 3 h. After this time, PdBr2 (cod) 23 (378 mg, 1. 01 mmol) was added, and the mixture was stirred for an additional 4 h. The reaction volume was concentrated by half, and the contents were filtered through a glass-fritted funnel. The dark-green solid was washed three times with acetone (10 mL) and dried under vacuum. Yield: 498 mg (0. 533 mmol, 53. 4 %) ; 1H NMR (400 MHz, C6D6): δ=1. 39 (t, 36 H, 6 Hz, tBu), 1. 47–1. 61 (br m, 12 H, CH2), 1. 77 (br s, 6 H, CH), 2. 32 ppm (br s, 12 H, CH2) ; 13C NMR (100 MHz, C6D6, 40 °C): δ=29. 4 (t, 4. 0 Hz, CH2), 33. 0 (br s, CH2), 36. 8 (t, 1. 8 Hz, C Ad), 36. 9 (s, CH3), 41. 7 (br s, CH), 42. 0 ppm (br s, CMe3) ; 31P NMR (202 MHz, C6D6): δ=88. 0 ppm (s) ; Anal. calcd. for C36H66Br2P2Pd2: C 46. 32, H 7. 13, Br 17. 12; found: C 45. 94, H 7. 03, Br 17. 02. Supporting information for this article is available on the WWW under http: //www. wiley-vch. de/contents/jc₂002/2002/z50085ₛ. pdf or from the author. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.