The study presents an approach to the synthesis of micro- and nano-sized biosilica from rice husk ash (RHA) and describes its effective incorporation into cementitious composites for 3D concrete printing (3DCP). It is demonstrated that the calcination of rice husk at 700 °C, followed by sonochemical treatment, leads to the formation of a nanoscale silica phase with high pozzolanic reactivity. X-ray powder diffraction (XRD), infrared spectroscopy (IR), differential thermogravimetric analysis (DTG), and scanning electron microscopy (SEM) show that the incorporation of nano-biosilica (NBS) into the cementitious composites accelerates the hydration process through a nucleation effect and pozzolanic reaction. This, in turn, densifies the hardened cement microstructure and improves compressive strength significantly. Laboratory 3D concrete printing tests demonstrate that adding 1.72 wt.% NBS improves shape retention, decreases layer slump, and improves interlayer bond strength. The results indicate the viability of rice husk ash-derived biosilica as a supplementary cementitious material (SCM) in 3DCP due to its positive influence on the concrete mortar properties and parameters.
Васильевич et al. (Sun,) studied this question.