Wall shear stress in microvascular segments varied identically from approximately 100 to 10 dyne/cm2 as intravascular pressure fell from 70 to 15 mm Hg.
Hemodynamic parameters were determined in each vessel segment of six complete microvascular networks in the rat mesentery by using a combination of experimental measurements and theoretical stimulations. For a total number of 2592 segments, a strong unified dependence of wall shear stress on intravascular pressure for arterioles, capillaries, and venules was obtained. All three types of segments exhibit an essentially identical variation of shear stress from high to low values (from approximately 100 to 10 dyne/cm2) as intravascular pressure falls from 70 to 15 mm Hg. On the basis of these observations, it is proposed that vascular beds grow and adapt so as to maintain the shear stress in each vessel at a level that depends on local transmural pressure. In contrast to Murray's classic 'minimum-cost' hypothesis, which implies uniformity of wall shear rate throughout the vasculature, the proposed design principle provides an explanation for the functionally important arteriovenous asymmetry of wall shear rates and flow resistance in the circulation.
Pries et al. (Wed,) reported a other. Intravascular pressure was evaluated on Dependence of wall shear stress on intravascular pressure. Wall shear stress in microvascular segments varied identically from approximately 100 to 10 dyne/cm2 as intravascular pressure fell from 70 to 15 mm Hg.