Flexible Pipes Subjected to SCC CO2: Review and Means to Increase Reliability on Service Life Applied to Brazilian Pre-Salt Fields

Abstract Flexible Pipes were widely used in Brazil offshore developments and the challenge on overcoming increasing water depths, high pressures and fluids with high contaminants was always present. In 2017 a new failure mode, called SCC CO2 was disclosed bringing such disruption in the use of this equipment since, at that time, the conditions observed in Brazilian Pre salt were like the "perfect storm" for the failure mode to happen. It had high concentrations of CO2, therefore high permeation in the anulus, high stresses and the possibility to have anulus flooded as result of an outer sheath breach or even due to permeated water. These were the triple conditions needed to have the failure, considering that all metallic material used in the pipe were subjected to this phenomenon. Since the discovery was made, several test campaigns to better understand and replicate the phenomena started. They covered pipe retrieved from field dissection, several small-scale materials testing, and fracture mechanics to create reliable crack propagation calculations. There were 3 mains focus areas; to understand how to deal with the installed fleet, to define the conditions in which a crack would appear and define, using fracture mechanics, how long a crack would take to break the wire. In other words, it was intended to define what is the remaining service life. As a result of this investigation some initial beliefs like that all materials were subjected to the phenomena and that a solution was far away were somehow reduced and reshaped. There was also the initiative to embark on technology for detection of the anulus condition, mainly to define if it is flooded or not. Some ROV inspection means were added to the endfitting and some sensors were added to the interconnected pipe sections that allow conditioning monitoring or inspection from the floating unit, not using a ROV. This paper will cover the improvements done since the disclosure of the phenomena in 2017, reviewing what is known about it so far, what is still to be discovered and how the results achieved to date can contribute for a more reliable and longer service life for the flexible pipes to be applied in a rich CO2 environment.