PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
September 2, 1996Applied Physics Letters37 citations

A single precursor photolitic chemical vapor deposition of silica film using a dielectric barier discharge xenon excimer lamp

View Full Paper
AYAtsushi YokotaniNTNoritaka TakezoeKKKou Kurosawa

Key Points

Key points are not available for this paper at this time.

Abstract

Silica film has been produced at room temperature by a single precursor process of photolitic chemical vapor deposition using a newly developed Xe excimer lamp. Tetraethoxyorthosilicate (TEOS) has been used as a raw material. Transparent thin film of SiO2 was obtained on single crystalline Al2O3 substrates and its properties were evaluated by means of the reflection Fourier transformation-infrared spectroscopy, the scanning electron microscopy, and ultraviolet-visible spectrometry. Consequently, it was found that the main component of the film was SiO2 and very small amounts of residual organic materials were contained. It was also found that the film was very dense and the refractive indices were only 1.7% smaller than that of bulk silica glass.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Yokotani et al. (1996) studied this question.

synapsesocial.com/papers/6a1b25b95853c704fce57f52https://doi.org/10.1063/1.117594
Ask AI
Helpful
Bookmark
Share
View Full Paper