PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
January 15, 2018Advanced Materials Interfaces136 citations

A High‐Performance Self‐Powered Photodetector Based on Monolayer MoS2/Perovskite Heterostructures

View Full Paper
FBFan BaiSinopec (China)JQJunjie QiJiangnan UniversityFLFeng LiUniversity of Science and Technology of China

Key Points

Key points are not available for this paper at this time.

Abstract

Abstract Here, it is first reported that a self‐powered photodetector based on a MoS 2 /CH 3 NH 3 PbI 3 vertical type heterojunction, which has responsivity of 60 mAW −1 and response/recovery time of 2149/899 ms. Under bias, it exhibits a photoswitching ratio exceeding 1522, fast response/recovery time of 205/206 ms, and high photoresponsivity of 68.11 AW −1 . The optoelectronic performances of the photodetector are closely related to the type of the MoS 2 /CH 3 NH 3 PbI 3 heterojunction, which acts as a hole (electron) transport field and can effectively decrease the recombination of holes and electrons. Additionally, the MoS 2 /CH 3 NH 3 PbI 3 planar type heterojunction is also built to compare with the vertical type in optoelectronics behavior. Due to the existence of internal field, the properties of vertical type photodetector are better than those of the planar type which also presents good performance with on/off ratio up to 1476, photoresponsivity of 28 AW −1 , and response rate of 356/204 ms. These results pave a new way to form an ultrahigh performance MoS 2 /CH 3 NH 3 PbI 3 heterojunction, hold the promise for construction of a self‐powered photodetector, and develop promising atomically thin MoS 2 heterostructure device for photovoltaic and optoelectronic applications.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Bai et al. (2018) studied this question.

synapsesocial.com/papers/6a1c96455a44e3b4a7c3db14https://doi.org/10.1002/admi.201701275
Ask AI
Helpful
Bookmark
Share
View Full Paper