PulseExploreJournal ClubDebatesTrendingResearchersJournals
Instagram
HomeExploreJournal ClubTrending
Synapse
⌘+K
Synapse
November 18, 2020Cement and Concrete Research449 citationsOpen Access

The reaction between metakaolin and limestone and its effect in porosity refinement and mechanical properties

FZFranco ZuninoKSKaren Scrivener

Key Points

Key points are not available for this paper at this time.

Abstract

In limestone calcined clay cements (LC3), more hemicarboaluminate and monocarboaluminate is observed, as compared to other blended cements, from the reaction of metakaolin with limestone. In this study, it is shown that the formation of these carboaluminate phases, predominantly occurs during a “third” hydration peak, after the main alite and aluminate peaks. The influence of the metakaolin content, level of sulfate addition and the water to binder ratio on the position and magnitude of this peak were investigated. This precipitation of hemi and monocarboaluminate has a significant effect on porosity refinement and strength development. It was also observed that alumina from metakaolin can contribute to the precipitation of ettringite if sufficient sulfate is available.

Ask AI
Helpful
Bookmark
Share
View Full Paper

Cite This Study

Zunino et al. (2020) studied this question.

synapsesocial.com/papers/6a82b07544ed55722c75b224https://doi.org/10.1016/j.cemconres.2020.106307
Ask AI
Helpful
Bookmark
Share
View Full Paper