Background In the past 30–40 years, conflicts over limited conventional energy sources and the negative climate change caused by them have attracted researchers and analysts to new, clean, and green energy technologies. Thereby reducing the consumption of conventional fuel and the negative impact on the climate. The production of alternative energy in the form of thermal energy storage using phase change materials (PCMs) is one of the techniques that not only reduces the gap between the supply and demand of energy but also increases the stability of the energy supply. The tendency of PCMs to melt and solidify over a wide temperature range makes them more attractive for use in many applications. The effective and efficient storage of solar energy by PCM has the potential to significantly advance the use of renewable energy. Methods Organic non-paraffin compound beeswax (BW) mixed with other non-paraffin compounds stearic acid (SA), Palmitic acid (PA), Myristic acid (MA), and Lauric acid (LA) in different compositions with the help of magnetic stirrer at 50–60°C for 3–4 hours to prepare BWSA, BWPA, BWMA, and BWLA eutectic PCM. Results Prepared eutectics melt and solidify in the temperature range 36–56°C and with latent heat in the range of 155–211 kJ/Kg, and they are thermally Stable around 200-250 °C. Conclusions Due to suitable temperature and good latent heat storage range, it is a good choice as thermal energy storage, for solar drying applications.
Pandey et al. (Wed,) studied this question.