Key points are not available for this paper at this time.
Ultrasound has been identified as a suitable method for inspecting complex structures (such as nuclear reactors), as it can propagate through both liquids and steel elements to be inspected. Leaky Lamb waves have been extensively researched to detect damages in plate-shaped structures, which are waves that reemit bulk waves towards the surrounding fluid. An imaging method based on the time reversal of Lamb waves has been applied in preliminary work to detect the edge of a single immersed plate and a machined notch. In this study, the frequency-domain topological energy method is applied to a set of two parallel immersed plates to succeed in accurately localizing defects represented by the edges of the plates. Firstly, the behaviour of leaky Lamb waves is briefly addressed. A 2D-STFT (two-dimensional Short Time Fourier Transform) is then used to separate the different Lamb modes, which is a powerful tool for tracking the modes involved in the propagation over time. The Fast Topological Imaging Method (FTIM), which allows for faster computations with less data storage, is applied to the case of Lamb waves in a set of parallel plates. Lamb modes can be identified then selected to improve the analysis of the obtained images. . An original methodology is proposed based on spots (maxima) analysis for interpreting the results of this topological energy and identifying the edges of the two plates. This process could be applied, in the same manner, to other scattering defects in ultrasound non-destructive testing of plates.
Vallée et al. (Tue,) studied this question.