Key points are not available for this paper at this time.
Abstract Disc cutters are essential for full-section hard-rock tunnel boring machines. The performance of these devices directly affects tunnel engineering costs and duration. This paper proposes a sinusoidal variable cross-section (VCS) cutter ring and design method and establishes a digital model. Rock-like materials are simulated with a finite element model, and the model validity is verified via rock simulation mechanics tests. A disc cutter rolling rock simulation model for a linear cutting machine is also established, and simulation tests are performed for single- and three-cutter rolling using sinusoidal VCSs and constant cross-section (CCS) cutter models, respectively. The stress and energy changes for the cutters and rock-like material damage area were compared via simulation, confirming that some sinusoidal VCS cutter rings do less work on rock-like materials and cause larger crushing areas under the same engineering parameters; therefore, these cutter rings have smaller specific energies. The sinusoidal VCS cutter ring performance is 7% greater than that of CCS on average under single-cutter simulation, and the intermediate cutter performance of the intermediate cutter is 9% greater than that of CCS on average under three-cutter simulation. Thus, sinusoidal VCS cutter rings offer improved rock damage performance, and further research and application of this technology will improve the working efficiency of tunnel boring machines.
Zhao et al. (Sun,) studied this question.