Key points are not available for this paper at this time.
Due to the variety of defects that arise in electrical machines, it is necessary to use more effective methods for monitoring their condition. All over the world research and development of new means and methods for monitoring powerful electrical machines during their operation is underway. Some examples of recent advances are vibration diagnostic methods for assessing the compaction of components inside a transformer, acoustic and electrical systems for monitoring partial discharges, data processing using digital methods, and new sensors for continuous monitoring of gases and moisture in oil, as well as hot spot temperatures. Additionally, thermal imaging testing of power equipment is also an important tool to ensure reliable operation. It is believed that the most effective method is gas chromatographic oil analysis, which can identify most defects in oil-filled equipment. During the operation of powerful electrical machines, the use of existing non-destructive testing methods does not allow a complete assessment of the condition of the main parts of the equipment, as an analysis of damage locations shows, 25% are damage to the core and windings. Effective monitoring of the condition and determination of the performance of transformers is of particular importance, since they are key elements in the operation of nuclear power plants. The paper considers the possibility of using the eddy current testing method; determining a defect in magnetic core steel is based on fixing the unevenness of the magnetic field on the horizontal or vertical planes of a yoke or rod consisting of electrical steel plates. Monitoring and evaluating the functioning of existing equipment, detecting deficiencies in the early stages of their development, when repair costs are still minimal, and preventing emergency failures become a priority. In accordance with the growth rate of detected deficiencies, monitoring is carried out from time to time or continuously, the maximum number of monitored characteristics is achieved when the transformer is fully tested to determine its functionality.
Mel’nikov et al. (Wed,) studied this question.