Thermal laser evaporation is a physical vapor deposition technique of increasing interest because of its ability to evaporate essentially any solid element, even the most refractory such as W. However, many films deposited by this method, especially non-epitaxial films, remain to be characterized; further, key system components such as the laser delivery system have not been described in detail. Here, we present the evaporation and characterization of ultrathin nickel films deposited with a home-built thermal laser evaporation system. The system employs a continuous-wave 1 kW fiber laser (1070 nm) focused to sub-millimeter diameter onto a nickel target rod mounted inside an ultrahigh-vacuum chamber. The laser heats the target to a temperature high enough to produce vapor for film deposition; for Ni, this temperature is around the melting point of 1725 K. We report the characterization of the surface roughness, composition, and room-temperature electrical properties of the films along with the design of the major components of our system. This work advances the growing consensus regarding the potential of thermal laser evaporation for thin film deposition and epitaxy and provides the necessary design information to facilitate broader adoption of the technique.
Catherall et al. (Fri,) studied this question.