The present work investigates the effect of powdered lignocellulose from alfalfa straw obtained by a chemo-extrusion method, as well as its carboxymethylated derivative, on the physicomechanical properties and swelling behavior of vulcanizates based on nitrile butadiene rubber (NBR, BNKS-28 AMN grade). Carboxymethylation of lignocellulose was performed using microwave activation. The functional group composition of the modified lignocellulose was characterized by Fourier-transform infrared (FTIR) spectroscopy, which confirmed successful carboxymethylation and revealed a reduction in crystallinity. Thermogravimetric analysis (TGA) was used to determine the thermal stability of the swelling carboxymethylated fillers. The degree of crystallinity of the carboxymethylated swelling fillers was evaluated by X-ray diffraction (XRD). It was shown that the introduction of powdered lignocellulose and its carboxymethylated derivative into the rubber compounds lead to an increase in compound viscosity and prolong the optimum cure time, while having no effect on the scorch time, in a manner similar to that observed for the commercial product sodium carboxymethylcellulose (NaCMC). It has been shown that the introduction of powdered lignocellulose and its carboxymethylated derivative increases the tensile strength of the rubber and improves its resistance to the action of mineralized water compared with the samples containing NaCMC. It was also demonstrated that carboxymethylated lignocellulose exhibits enhanced sorption capacity comparable to that of NaCMC. Overall, carboxymethylation of lignocellulose derived from alfalfa straw significantly improves the stability and sorption characteristics of nitrile butadiene rubber composites. These findings indicate that carboxymethylated lignocellulose is a sustainable and effective alternative to industrial NaCMC for use as a functional filler in elastomeric materials.
Nakyp et al. (Sun,) studied this question.