The scouring of cohesive and non-cohesive materials downstream of sluice gates is primarily based on high-velocity flow. The present study considered an experimental hydraulic model of submerged water flow issuing from a sluice gate installed on an apron that leads to the scour hole and dune in a downstream mixture of sand and clay bed. The purpose was to achieve a suitable efficiency of the weight ratio of clay in the sand–clay mixture (c) for the sediment bed. Scour parameters, including maximum scour depth (dse) and its longitudinal location (xse), and maximum dune height (hd) and its location (xd), were measured and compared for three variations, c = 0.1, 0.2, and 0.3, under five hydraulic conditions. Results revealed that all scour parameters were reduced by adding clay to the sand soil, and the maximum reduction was for dse with the maximum value of 27.66%. The observed data were analyzed by multiple nonlinear regression analyses for each scour parameter to present new prediction equations for practical uses. The computed statistical parameters of correlation coefficient (R2), root mean square error (RMSE), mean absolute percentage error (MAPE), Nash–Sutcliffe efficiency (NSE), and scatter index (SI) present good accuracy for the predicted equations in the ranges of experimental data.
Khalili et al. (Mon,) studied this question.