What question did this study set out to answer?

This research aims to analyze how wind speed affects heavy gas diffusion during leakage and improve predictive models for cloud radius.

February 26, 2026Open Access

Study on Instantaneous Leak Diffusion Characteristics of Heavy Gas Under Wind Speed Control and Modification of Cloud Cluster Radius Prediction Model

Key Points

This research aims to analyze how wind speed affects heavy gas diffusion during leakage and improve predictive models for cloud radius.
Conducted numerical simulations using computational fluid dynamics (CFD) to build a heavy gas diffusion model.
Tested under five wind speed conditions: 0.5 m/s, 1 m/s, 3 m/s, 6 m/s, and 10 m/s.
Performed grid independence verification and compared results with actual measured data.
Identified dispersion phases of heavy gas and modified the cloud radius prediction model with a correction term.
Established three diffusion stages: gravity diffusion, density stratification, and passive diffusion.
The modified cloud radius prediction model showed alignment with CFD simulation trends, maintaining a maximum relative error under 10%.
Higher wind speeds lead to increased peak gas concentrations and reduced arrival times near the source; lower speeds result in the opposite in mid- to far-field zones.
Provided a basis for risk zoning and emergency response in heavy gas leakage scenarios.

Abstract

The diffusion process of heavy gas during instantaneous leakage is significantly influenced by wind speed. Accurately characterizing the coupling relationship between wind speed and heavy gas diffusion is crucial for accident risk assessment and emergency response. Based on the Thorney Island 008 test, this study employs computational fluid dynamics (CFD) numerical simulation to construct a gas leakage diffusion model. Through grid independence verification and comparison with measured data, the optimal simulation scheme is determined. Design five wind speed conditions of 0.5 m/s, 1 m/s, 3 m/s, 6 m/s, and 10 m/s to investigate the division of heavy gas dispersion phases, the cloud radius modification model, and the spatiotemporal distribution characteristics of downwind concentrations. The study clearly identifies that heavy gas leakage dispersion can be divided into three stages: gravity diffusion, density stratification, and passive diffusion. By introducing a dimensionless wind speed correction term to improve the cloud plume radius prediction model, the validation results show that the calculated values from the modified model align with the trend observed in CFD simulations. Under all wind speed conditions, the maximum relative error remains within 10%. Downwind gas concentration distribution characteristics reveal that in the near-source areas (25 m, 100 m), higher wind speeds correlate with higher peak gas concentrations and shorter peak arrival times. Conversely, in the mid- and far-field zones (200–500 m), lower wind speeds are associated with higher peak gas concentrations and longer peak arrival times. The cloud radius modification model proposed in this study enables the prediction of heavy gas cloud radii under varying wind speeds within specific conditions. The revealed characteristics of the diffusion phase and the spatiotemporal distribution patterns of gas concentrations provide scientific basis for risk zoning and emergency response planning in heavy gas leakage incidents.

Read Full Paperexternally

Bookmark

View Full Paper

Cite This Study

Yang et al. (Wed,) studied this question.

synapsesocial.com/papers/699fe41d95ddcd3a253e86a0 https://doi.org/https://doi.org/10.3390/sym18030401

Bookmark

View Full Paper