Dynamic characterization of calcareous (carbonate) sands is essential for performance-based design of offshore foundations, coastal reclamation, and marine infrastructure in tropical and subtropical regions. In contrast to silica sands, carbonate sediments are biogenic and typically comprise angular, irregular grains with intra-particle voids and fragile skeletal microstructure. These traits promote grain crushing and fabric evolution at relatively low-to-moderate confinement, leading to pronounced stress dependency, strong nonlinearity with strain amplitude, and substantial scatter in laboratory stiffness and damping measurements. Consequently, empirical correlations calibrated primarily on quartz sands may yield biased estimates when transferred to carbonate environments. This study presents an ML-driven, leakage-aware benchmarking framework for predicting two key dynamic parameters of biogenic calcareous sands, damping ratio D and shear modulus G, using standard tabular descriptors commonly available in geotechnical practice. Two consolidated experimental databases were curated from resonant column and cyclic triaxial measurements (D: n=890; G: n=966), spanning mean effective confining stress 25 ≤ σm′≤1600 kPa and a wide range of density and gradation conditions. To emphasize transferability, explicit deposit/site labels were excluded, and missingness arising from heterogeneous reporting was handled through a consistent preprocessing pipeline (training-only imputation, categorical encoding, and scaling). Eleven regression algorithms were evaluated, covering linear baselines, regularized regression, neighborhood learning, single trees, bagging and boosting ensembles, kernel regression, and a feedforward neural network. Performance was assessed using R2, RMSE, and MAE on training/validation/test splits, and engineering credibility was supported through explainability-based diagnostics to verify mechanically plausible sensitivities. Results show that ensemble-tree models (Extra Trees and Random Forest) provide the most reliable accuracy–robustness balance across both targets, consistently outperforming linear models and the tested SVR configuration and exhibiting stable validation-to-test behavior. The explainability audit confirms physically meaningful separation of governing controls: stiffness is primarily stress-controlled (σm′ dominant for G), whereas damping is primarily strain-controlled (γ dominant for D). The proposed framework supports practical deployment as a fast surrogate for generating G − γ and D − γ curves within the training domain and for guiding targeted laboratory test planning in carbonate settings.
Almarzooqi et al. (Mon,) studied this question.