This study focuses on enhancing the performance of piezoelectric nanogenerators (PENGs) fabricated by electrospinning (ES) of polyvinylidene fluoride (PVDF) infused with varying concentrations (0, 1, 3, 5, and 7 wt.-%) of copper oxide (CuO) nanoparticles. Structural changes and the β-phase proportion in nanofibers (NFs) were examined using XRD and FTIR-ATR. Surface morphology and roughness were characterized using FE-SEM and AFM, respectively. The water-repellent characteristics of the NFs were assessed through WCA measurements. Electrical output (voltage and current) was evaluated under mechanical pressure using a customized setup that applied 1.0 kgf at 1.0 Hz. The pristine PVDF-based PENG generated an output of 1.7 V and 0.53 μA, while the composite NF with 5 wt.-% CuO (5PCu) delivered a significantly enhanced output of 13.7 V and 1.6 μA. The 5PCu device was further tested for detecting human activities, including tapping, wrist movements, walking, and jumping, thereby demonstrating its potential for self-powered wearable electronics.
Bindhu et al. (Fri,) studied this question.