To address the shortage of natural sand and the unclear mechanism of lithology’s influence on the application of manufactured sand, this study explores the applicability of neutral rock manufactured sand in asphalt mixtures. Taking neutral diabase manufactured sand as the research object, a series of tests including the Marshall test, water stability test, high- and low-temperature stability test, and surface free energy (SFE) test were conducted to systematically analyze the effects of aggregate lithology on the volumetric indicators, road performance, and interface adhesion of asphalt mixtures. Additionally, the improvement effect of cement as an anti-stripping agent was verified. The results show that lithology of manufactured sand significantly regulates the performance of asphalt mixtures. In terms of volumetric indicators, the limestone manufactured sand mixture has the smallest void ratio (3.81%), while the diabase manufactured sand mixture has the largest (5.81%), requiring an appropriate increase in the mixing ratio of diabase manufactured sand to optimize the compaction effect. For water stability, the short-term performance ranks as diabase ≈ limestone > granite, and the long-term durability ranks as limestone > diabase > granite. A least-squares linear regression model demonstrated that the polar component of aggregate surface free energy exhibits a strong positive correlation with asphalt–aggregate adhesion work (R2 = 0.92), which quantitatively explains variations in the 48 h immersed Marshall residual stability ratio among different lithologies. Regarding high-temperature stability, the order is diabase > limestone > granite. Thanks to its low crushing value and strong angularity, the diabase manufactured sand mixture achieves a dynamic stability of 12,629 times/mm at 60 °C, showing the best rutting resistance. In terms of low-temperature performance, the diabase manufactured sand mixture exhibits the optimal initial crack resistance (maximum flexural strain of 2757 με) and long-term durability (strain attenuation rate of 11.7% after 30 cycles), while the granite manufactured sand mixture fails to meet the design requirements. Adding 1.5%~2.0% cement can significantly improve the adhesion between manufactured sand and asphalt, with more obvious enhancement effects on granite and diabase, thereby optimizing water stability and high-temperature stability. The research results provide theoretical support and technical reference for the scientific selection and engineering application of fine aggregates in asphalt pavements.
Hao et al. (Mon,) studied this question.