The nominal maximum aggregate size (NMAS) plays a critical role in determining the mechanical performance of cement-stabilized macadam (CSM), yet its meso-mechanical influence mechanism remains insufficiently understood. In this study, three skeleton-dense CSM mixtures with different NMAS values were designed, and a combined experimental–numerical approach was adopted to investigate the macro- and meso-scale mechanical behavior. Uniaxial compression tests and aggregate crushing value tests were conducted to evaluate strength development and load-transfer characteristics, while a three-dimensional discrete element method (DEM) model incorporating realistic aggregate morphology was established to analyze the evolution of contact forces and crack propagation. The results show that increasing NMAS significantly improves the mechanical performance of CSM. Compared with CSM-30, the 7-day compressive strength of CSM-40 and CSM-50 increased by approximately 10.3% and 37.3%, respectively. The stress–strain response indicates that mixtures with larger NMAS exhibit higher stiffness and a higher strain. At the meso-scale, a larger NMAS promotes the formation of a more efficient force-chain network dominated by coarse aggregates. Strong contacts were predominantly carried by aggregates larger than 9.5 mm, and in CSM-50, the proportion of strong contacts in the 37.5–53 mm fraction exceeded 90%, indicating that the largest particles likely form the primary load-bearing skeleton. In addition, increasing NMAS delayed crack initiation, reduced crack propagation rate, and decreased the total number of cracks at failure. These findings demonstrate that macroscopic strength improvement is closely associated with meso-scale optimization of the aggregate skeleton and enhanced load-transfer efficiency. This study provides a mechanistic basis for NMAS selection and gradation optimization in semi-rigid base materials.
Zhou et al. (Fri,) studied this question.