Robotic milling offers flexibility and lower capital cost than conventional CNC machining but is limited by low, pose-dependent structural stiffness. This study experimentally investigates how pose, cutting orientation, and engagement conditions govern dynamic response and machining accuracy, benchmarked against a CNC machine under matched conditions. Tool-point frequency response functions show that the robot exhibits dominant low-frequency structural modes at 8–15 Hz with compliances on the order of 10−5 m/N, one to two orders of magnitude more flexible than higher-frequency tool–holder modes (~10−6 m/N). In contrast, the CNC system is dominated by a stiff mode near 600 Hz (~2 × 10−7 m/N) with negligible low-frequency compliance. During cutting, the response is not resonance-driven; instead, low-frequency compliance induces modulation of spindle-synchronous vibrations, resulting in broadband spectral spreading and cycle-to-cycle variability. Poincaré analysis captures this modulation, which increases with spindle speed and depth of cut. Orientation-dependent alignment with compliant directions amplifies vibration and cross-axis coupling. Regression analysis shows a significant association between Z-direction vibration and depth-of-cut deviation (R = 0.739 locally; R = 0.363 globally). The results establish a framework linking compliance, modulation, and machining performance in robotic milling.
Chandan et al. (Sun,) studied this question.