The focus of this work was to investigate the mechanical properties of additively manufactured (AM) discontinuous carbon fibre-reinforced polymer (DCFRP) composites. Towards the specimen’s fabrication, the Fused Filament Fabrication (FFF) additive manufacturing technique was employed. A number of input printing parameters were varied, such as the infill pattern, infill density, layer height, shell configuration, and raster orientation, in a systematic way. The role of these paraments on the mechanical properties, such as tensile, flexural, and impact strength were investigated. The data was analysed in-depth and the “main effect method” was employed for their comparative ranking. The results of this study showed that tensile and bending strengths were strongly correlated with material content and structural reinforcement. The specimens attained up to 76.7 MPa of tensile strength, while the flexural strength was up to 159.4 MPa, with a deflection of up to 8 mm and 16 mm, respectively. Solid infills, higher densities, finer layer heights, and added shells significantly improved the strength and stiffness. Grid-patterned and low-density specimens caused poor load-bearing capacities, while hexagonal and gyroid infills offered a more balanced performance.
Degnah et al. (Sat,) studied this question.