Aiming at the problems of low separation efficiency and high impurity content in the cleaning process of moist rice threshed materials, this study systematically explored the influence mechanism of moisture on the segregation behavior of rice threshed products by combining physical experiments and CFD-DEM coupling simulation. Physical test results show that moist conditions significantly change the properties of threshed materials: the impurity mass fraction increases from 3.1% to 6.8%, the straw breakage rate rises from 5.97% to 6.99%, and the working load and unbalanced dynamic load of the threshing unit increase noticeably. On this basis, a gas–solid coupling simulation model of the cleaning device embedded with the Johnson–Kendall–Roberts (JKR) cohesive contact model is established. It is found that moist threshed materials exhibit an obvious stratified movement on the sieve surface, in which the bottom straw layer moves slowly while the upper material layer flows rapidly, resulting in a 50% increase in the sieve surface load. This phenomenon directly accounts for the rising impurity content observed in experiments. Through integrated experimental and simulation analysis, this research clarifies the macroscopic laws of moisture effects and reveals three key pathways for moisture to deteriorate cleaning performance: changing physical characteristics of threshed materials, enhancing inter-particle adhesion, and forming stratified movement. The findings provide an innovative research scheme and reliable theoretical support for the design and optimization of high-efficiency cleaning devices for rice combine harvesters.
He et al. (Tue,) studied this question.