In recent years, accelerated industrialization has made water pollution a major challenge, bisphenol pollutants being one of the most typical examples. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been applied in environmental remediation due to their broad applicability and high pollutant removal efficiency. The key to AOPs lies in developing low-cost, highly active catalysts. This study utilized waste biomass of baijiu distillers’ grains (DSGs) as precursor to prepare biochar materials for bisphenol pollutant removal. Through high-temperature pyrolysis at 900 °C for 2 h in the presence of NaCl and KCl as activator, biochar-based materials (BC-x) were prepared, which possessed advantageous features of large specific surface area and high nitrogen doping content. When applied for typical bisphenol pollutant removal, the selected BC-900 biochar exhibited almost 100% bisphenol AF (BPAF) removal efficiency after a 30 min adsorption and following a 5 min PMS activation process under reaction conditions of 200 mg L−1 of BC-900, 200 mg L−1 of PMS, and 20 mg L−1 of BPAF. Reactive species of sulfate radicals (SO4⦁−), hydroxyl radicals (⦁OH) and singlet oxygen (1O2) were responsible for BPAF degradation, among which 1O2 played the major role. Further toxicity prediction of the BPAF degradation intermediate products implied the low ecological risk of the constructed BC-900/PMS catalytic system for BPAF removal. The findings in this study may provide useful guidance for waste biomass conversion and organic contamination remediation in water.
Xie et al. (Mon,) studied this question.