The increasing share of renewable energy, such as solar and wind energy, in the energy mix implies a demand for sustainable energy storage systems for the mitigation of the intermittency of these energy sources. One option, therefore, is stationary batteries based on abundant sodium, stored in hard carbon (HC) anodes. In this work, following the sustainable by design principle, HCs were synthesized from cotton-based textile waste using three different thermochemical routes: hydrothermal carbonization (HTC) followed by pyrolysis under nitrogen atmosphere (HC-250-N), HTC followed by pyrolysis under a water vapor stream (HC-250-W), and direct pyrolysis (HC-direct-N). The impact of the synthesis method on the physicochemical properties and electrochemical performance of the HCs was thoroughly investigated. X-ray diffraction, Raman spectroscopy, electron microscopy, and gas adsorption analyses revealed that the HTC pre-treatment significantly enhanced the carbon content, microporosity, and degree of structural graphitic order. HC-250-N exhibited the highest graphitic character and more uniform microstructure, while HC-250-W showed the largest specific surface area and broader micropore distribution. Electrochemical evaluation in sodium-ion half-cells indicated that HC-250-N delivered the most balanced performance, with a reversible capacity of 335 mAh g−1 and good cycling stability. These findings confirm the potential of textile waste-derived HCs as promising and sustainable anode materials for sodium-ion batteries and highlight the importance of tailoring synthesis parameters—such as HTC treatment and pyrolysis conditions—to optimize their structural and electrochemical properties.
Rapeyko et al. (Tue,) studied this question.