Key points are not available for this paper at this time.
Torque ripple has been a critical issue for high-performance applications using permanent magnet synchronous machines (PMSMs). An efficient approach to minimize torque ripple is to control the stator current to follow an optimized current reference, which will produce an extra torque ripple to cancel the existing one. This paper proposes a multiple reference frame (MRF) based controller for torque ripple minimization (TRM), in which the measured speed ripple is explored as the feedback control signal. The proposed MRF-based controller consists of a TRM controller whose task is to find the optimal current reference and a current controller whose task is to control the actual current to follow the optimized current reference. In TRM controller, the control of reference current magnitude and phase angle is decoupled, and proportional integral (PI) controller is able to achieve TRM control. In current controller, MRF is adopted to convert harmonic current control into dc current control; thus, PI controller is able to achieve harmonic current control with the use of MRF. Compared with existing approaches, the proposed controller is capable of TRM under both steady-state and transient conditions. The proposed controller is experimentally evaluated on a laboratory PMSM drive system.
Feng et al. (Wed,) studied this question.