A new demountable seismic-resistant joint to improve industrial building reparability

Purpose In seismic-prone areas, post-event operability is an important issue for steel warehouses. Even if surviving earthquakes with minimal probability of collapse, these structures might suffer so much damage, that their repair costs would be prohibitive. Strategies for limiting the building's damaged zones to specific parts (or “fuses”) can reduce repair costs. However, the replaceable part is limited to a small portion of the structure, whereas the rest cannot be disassembled. This is an issue for structures whose life span depends more likely on economics rather than on structural performances. Therefore, making them easily disassembled would be an advantage not only in seismic areas but also in any industrialized area. The purpose of this paper is to explore the “Design for Disassembly” (DfD) approach to complement seismic design and find a compromise between them. Design/methodology/approach In this work, one single type of structures was analysed (the moment-resisting frame), focusing on the design of a “disassemblable” seismic-resistant steel connection. The design process involved several iterations until an “optimum” compromise between seismic design and DfD was met. Findings This study shows that a compromise between seismic design and DfD is possible. In this case, the compromise was achieved at the expenses of more complex design calculations and a greater number of components than standard connections. However, this would be compensated for by a higher residual value for the entire structure. Originality/value Eventually, it was proved that a metric for assessing DfD steel connections is possible, but structural analyses are needed to validate it.