The use of high-pressure grinding rolls (HPGRs) is increasing in the ore industries as advanced technology is available for this type of comminuting. There are important parameters in these devices, which have many effects on productivity. One of the main reasons for damage on the rolls and, therefore, decreases in the machine’s productivity and efficiency is surface wear. This phenomenon must be carefully understood so that it can be controlled as much as possible through the readjustment and optimization of the effective parameters. In this research, the wear mechanism of HPGRs in a production line for iron ore concentrate was investigated. The results showed that there was greater wear at the center of the rolls and that changes to the chemical and physical properties of the incoming iron compared to the design condition reduced the rolls’ lives. The results showed a failure to perform appropriate mechanical adjustment and improper repair and maintenance.
Tahaei et al. (Fri,) studied this question.