Key points are not available for this paper at this time.
A large-scale triaxial shear test was performed on a waste slag dam created from the accumulation of waste slag during the construction of a pumped-storage power station. By integrating previous experience, the particle breakage index was refined to study the relationship between particle breakage and the deformation strength characteristics of the soil-rock mixture under different dry densities and stress states. The results show that as the confining pressure increases, various dry densities enhance particle breakage, leading to a transition from initial dilatancy to shear shrinkage in the soil-rock mixture. This change results in a decrease in the nonlinear internal friction angle and a decrease in the shear strength. This research explores the shear failure mechanism caused by the breakage of soil-rock mixtures. Examination of the particle grade before and after shearing shows that the extent of particle breakage expands with higher confining pressure, especially within the 20~60 mm grain size range. The fractal dimension is calculated concurrently, showing a strong correlation with the breakage index. The concepts of the phase transition stress ratio and failure dilatancy ratio were applied to describe the deformation characteristics. Experimental results demonstrate that the influence of the phase transition stress ratio on the dilatancy becomes more significant with increased dry density, yet this effect diminishes with higher confining pressure. As the breakage index increases, the failure dilatancy rate decreases following a power function, resulting in a gradual reduction in the dilatancy phenomenon. Considering the substantial influence of clay particles on the cohesion of the soil-rock mixture and the negligible effect of breakage on fine particles, it is proposed that the cohesion remains unchanged for determining the friction parameter. With increasing breakage index, the internal friction angle decreases nonlinearly, weakening the shear strength. This analysis shows that the refined particle breakage index effectively captures the particle breakage characteristics of soil-rock mixtures, providing valuable insights into the deformation and strength characteristics of engineering structures affected by particle breakage.
Xu et al. (Fri,) studied this question.