Key points are not available for this paper at this time.
This work introduces two datasets: FTIR-Plastics-C4 (Fourier Transform Infrared Spectroscopy, in plastics, at a wavenumber spectral resolution of 4 cm⁻¹) and FTIR-Plastics-C8 (Fourier Transform Infrared Spectroscopy, in plastics, at a wavenumber spectral resolution of 8 cm⁻¹), each comprising 3,000 spectra corresponding to the most used synthetic polymers worldwide. The main contribution of this work lies in the selection and FTIR characterization of the six polymers commonly used in everyday life and industry, namely Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), Polyvinyl Chloride (PVC), Low-Density Polyethylene (LDPE), Polypropylene (PP), and Polystyrene (PS). FTIR-Plastics-C4 consists of 3,000 spectra obtained with a configuration of 32 scans and a resolution of 4 cm⁻¹, covering a range from 4000 to 400 cm⁻¹. The FTIR-Plastics-C8 dataset also contains 3,000 spectra obtained with 32 scans and a resolution of 8 cm⁻¹ within the same range. A cleaning stage was applied to the FTIR-Plastics datasets, removing the header containing 19 lines and a footer with 34 lines from the original file. Additionally, a standardization process assigns 15 lines in the files to highlight information regarding the equipment used (based on the information provided by a Jasco spectrophotometer, model FT/IR-6700 PRO 4x, used for polymer characterization). The final dataset is in tabular .csv file format. The dataset is available on an open repository, and its application was designed to identify microplastics extracted from the environment and enable comparisons between commercial polymers.
Villegas-Camacho et al. (Thu,) studied this question.