Key points are not available for this paper at this time.
The current work suggests a new, ultrasensitive green functionalized sensor for the determination of anti-inflammatory medication diclofenac sodium (DCF). Alumina (Al2O3) and cerium oxide (CeO2) nanoparticles (NPs) have attracted great interest for their use as outstanding and electroactive nanocomposite in potentiometric and sensory research due to their ultrafunctional potential. The formed nanoparticles have been confirmed using various spectroscopic and microscopic techniques. The fennel extract-mediated Al2O3/CeO2 nanocomposite (Al2O3/CeO2 NCS) modified coated wire membrane sensor developed in this study was used to quantify DCF in bulk and commercial products. Diclofenac sodium was coupled with phosphomolybdic acid (PMA) to generate diclofenac phosphomolybdate (DCF-PM) as an active ion-pair in the existence of polyvinyl chloride (PVC) and o-nitrophenyl octyl ether (o-NPOE). Clear peaks at 270, and 303 nm with band gaps of 4.59 eV and 4.09 eV were measured using UV-vis spectroscopy of Al2O3 and CeO2, respectively. The crystallite sizes of the formed nanoparticles were XRD-determined to be 30.13±8, 17.72±3, and 35.8±0.5 nm for Al2O3, CeO2, and Al2O3/CeO2 NCS, respectively. The developed sensor showed excellent response for the measurement and assay of DCF, with a linearity between 1.0×10-9 and 1.0×10-2 mol L-1. EmV = (57.76) log DCF +622.69 was derived. On the other hand, the typical type DCF-PM presented a potentiometric response range of 1.0×10-5-1.0×10-2 mol L-1 and a regression equation of EmV = (56.97) log DCF+367.16. The functionalized sensor that was proposed was successful in determining DCF in its commercial tablets with percent recovery 99.95±0.3. Method validation has been used to improve the suitability of the suggested potentiometric technique, by studying various parameters with respect to the international council harmonization requirements for analytical methodologies.
Al-Sabbah et al. (Sat,) studied this question.