Analysis of the stress-strain state of the rotary device fastening part by the semi-analytical finite element method

The possibilities of the numerical apparatus developed on the basis of the semi-analytical finite element method are shown on the example of solving a specific problem. In the areas of maximum values, the parameters of the stress-strain state of the re-device fastening part were compared. It is worth noting the relatively complex configuration of the cross-section of the object, which led to a thorough study of the principles of constructing a grid area. The surface of interaction between the axis and the hull was modeled by a fairly thin layer of elements in relation to their thickness, which absorb only normal stresses. Analysis of the stress-strain state of the rotary device fastening part should be carried out from the standpoint of a spatial problem. Moreover, according to the results of the elastic calculation, the transition section between the body and the base plate turned out to be more loaded compared to the zone of contact interaction between the body and the axle. The data of the calculation performed in the elastic-plastic formulation made it possible to clarify the idea of the operating conditions of individual sections of the object and to draw a conclusion about the uniformity of the hull. The carried out studies confidently demonstrated the wide possibilities of the developed approach in solving new, practically important problems of elastic deformation of prismatic bodies of complex shape in the spatial formulation of new ones. To substantiate the reliability of the results of the calculation of the elements under consideration, a sequential increase in the number of FE in the cross-section and the number of retained terms of the decomposition along the length of the body, as well as an increase in the accuracy of solving systems of equations, are given. In addition, an assessment of the satisfaction of natural boundary conditions on the surface of the body and the conditions of equilibrium in the integral sense is given according to the characteristic sections within the region, which showed their fairly good performance. New data on the regularities of behavior of critical structures in the process of loading, due to the consideration of their physical and geometric parameters, have been obtained.