ERT-based experimental integrated approach for soil hydrological characterization in rainfall-induced shallow landslides prone areas

Abstract Shallow landslides triggered by heavy rainfalls are slope instabilities, developed in the most superficial eluvial layers, involving the first 2 m from the ground level. A crucial predisposing factor in shallow landslides occurrence is the soil water content, generally measured trough sensors installed in the first soil layers. However, despite being a very precise approach, this monitoring technique provides for a site-specific dataset. An integrated method to extend the hydrological characterization from site-specific to slope scale is presented, combining geotechnical analyses, field data monitoring, and geophysical investigations, in two experimental test sites located on Italian Apennines. Ten Electrical Resistivity Tomographies (ERT) of the first soil horizons were performed through different array geometries (2D-3D-Time-Lapse), calibrated and interpreted basing on stratigraphic logs, trenches, and monitored soil water content field data. The test sites colluvial covers composition was analyzed and compared to resistivity values to build conceptual hydrogeological models of the deep-water circulation. In addition, two time-lapse (4D) ERT surveys were performed in both test sites simulating very intense precipitations, to determine the resistivity variations at different soil drainage conditions, thus estimating the average bulk permeability. Bulk permeability can be also a useful input parameter for slope stability models, widely employed in engineering practices. This integrated method proved to be very useful for the hydrogeological characterization of the subsoil at slope scale, where it is susceptible to slope instability, improving the knowledge of water circulation, as well as the bulk permeability heterogeneities, which are shallow landslides triggering parameters.