Key points are not available for this paper at this time.
Reinforcement in composite and notched structures has long been the objective of many researchers. One of the commonly used solutions is hybrid composite. Other recently reemerged solutions are graded materials. These respond, according to their modes of solicitation, to the targeted resistance objectives. However, composites with UD (unidirectional) fiber quality limit the choice of structural grading solely based on their thickness. Using the finite element method and the ABAQUS calculation code, this work presents the embodiment through numerical prediction of an idea based on the concept of material grading by FGM function. The objective of this approach is to introduce the volumetric fraction of the FGM concept into the Fiber-Matrix mixing laws in UD composite. Thickness-graded composites are subjected to a volumetric fraction function raised to the power of a parameter called volumetric fraction index (n). These structures, according to the proposed concepts, are analyzed under thermomechanical loading. The proposed grading of these composites is based on the presence of fibers in the matrix, where the fiber is denser on one side, called the simple concept C-S. The other two symmetrical concepts, named C-2 and C-3, present denser fibers in the middle and on both sides of the plate, respectively. These proposed concepts aim to observe how damage is caused by different responses and levels. The results under the different analyzed parameters are evaluated and compared to the results of the two other non-graded composites, thus showing the limits of those that are graded in terms of properties. According to the thermomechanical loading, the proposed graded composite has demonstrated a resistance overcapacity by the grading index (n) or their locations by concept C1- and C-2 of fibers have played a role in optimizing this capacity. The results also show that damage is caused by deformation overcapacity.
Smaine et al. (Mon,) studied this question.