Key points are not available for this paper at this time.
Natural ventilation is a passive building technology that can reduce energy consumption for mechanical cooling of the indoor environment. Natural ventilation technology has received renewed attention from researchers. Theoretical studies on natural ventilation have evolved from a steady state to a non-steady state. Pumping ventilation is distinct from other ways of natural ventilation in that its flow direction alternatingly changes from the indoor to the outdoor. However, all published studies did not consider the influence of internal heat sources in pumping ventilation, and there are few discussions about the fluid periodic variation in wind-thermal coupling studies. Based on a previous study, the numerical simulation of single-sided pumping ventilation with two openings in the same wall driven by wind and thermal pressure is conducted in the paper. The influence of heat source intensity and the height of the location of the heat source are analyzed. The applicability of different ventilation rate calculation formulas is discussed. The results show that the indoor airflow oscillation frequency decreases in the effect of wind and thermal pressure, compared to driven by air pressure alone. However, changing the height location and intensity of the heat source does not affect the frequency characteristics in these cases.
Zhao et al. (Fri,) studied this question.