What type of study is this?

This is a Experimental Study study.

October 10, 2025Open Access

A Selective Method for Identifying Single-Phase Ground Faults with Transient Resistance in Isolated Neutral Medium-Voltage Networks

MJMerey JetpissovAlmaty University of Power Engineering and Telecommunications KTKazhybek TergemesAlmaty University of Power Engineering and Telecommunications SSSaken SheryazovL. N. Gumilyov Eurasian National University

Key Points

The proposed method improves detection of single-phase ground faults in medium-voltage networks, ensuring reliability.
Extensive modeling showed significant shifts in phasor angles due to transient resistances, enhancing fault detection capabilities.
The algorithm enhances fault localization and alarm generation, addressing high-impedance faults effectively.
Integration of advanced features supports future adaptations for smart grid and microgrid applications.

Abstract

Abstract This article presents a new selective method for identifying a faulty feeder in 6–35 kV electrical distribution networks with the isolated neutral configuration during single-phase ground faults (SPGFs) with transient resistance. The method is based on simultaneous comparison of the zero-sequence current (ZSC) angle and magnitude across all outgoing feeders and substation buses. Unlike conventional protection approaches relying solely on current magnitude or direction, the proposed algorithm enhances sensitivity and selectivity by detecting the 180° phase opposition between the faulted feeder's ZSC and the unfaulted feeders’ capacitive ZSC. To implement this strategy, a Centralized Ground Fault Protection Unit (CGFPU) was developed, capable of real-time feeder status monitoring, fault localization, and differentiated alarm or trip signal generation. Extensive modeling of SPGF processes was conducted in Matlab Simulink, considering transient resistance values ranging from 1 Ω to 10,000 Ω. Results demonstrated the nonlinear behavior of ground fault and capacitive currents relative to the transient resistance, with a notable shift in phasor angles approaching 180° for faulty feeders and near 0° for unfaulted feeders during bus faults. The CGFPU algorithm was tested under various scenarios, including feeder and busbar faults with different resistance levels, validating its capability to issue an alarm at high- resistance faults and trip signals for low-resistance bolted faults. The proposed method effectively ensures stable operation over a wide range of transient resistance values, maintains protection sensitivity even under high-impedance fault conditions, and resists nuisance tripping caused by charging or inrush currents. Integration of advanced concepts such as dynamic threshold setting, angle-magnitude multi-criteria decision-making, and principles of transient fault analysis further enhances the system's robustness. The protection system design is adaptable for future smart grid and microgrid applications requiring precise ground fault detection. The article also provides functional diagrams, operation algorithms, and a thorough theoretical analysis supported by simulation results.

AIに質問

Bookmark

View Full Paper