The flexible foam piezoresistive sensor demonstrates significant potential for wearable strain-sensing applications due to its substantial deformation capacity, excellent flexibility, and cost effectiveness. However, conventional flexible foam piezoresistive sensors often struggle to simultaneously achieve high sensitivity, a wide pressure detection range, fast response and long-term stability. This paper employed a glucose-based sugar-templating method to fabricate a fine-pore (50 μm) foam structure complemented by a dual-filler strategy to enhance overall performance. A robust porous conductive network was constructed by embedding zinc oxide (ZnO) and multi-walled carbon nanotubes (MWCNTs) into a polydimethylsiloxane (PDMS) matrix. The resulting sensor exhibits outstanding piezoresistive properties, featuring a wide linear detection range (0–80% strain) and a high sensitivity of 9.02 kPa−1 within the 0–10 kPa pressure range. It demonstrates rapid response/recovery times of 50/70 ms and maintains stable output performance even after 5000 compression cycles at 300 kPa. The sensor also exhibits negligible environmental interference and excellent long-term stability. When attached to finger joints, feet soles, or the throat, the sensor enables functions such as finger bending recognition, race-walking violation discrimination, gait analysis, and vocal fold vibration recognition, thereby demonstrating its considerable potential for application in human–computer interaction and human motion detection.
Zheng et al. (Mon,) studied this question.