High-ash coal slime water, characterized by its stable colloidal suspension of fine kaolinite particles, poses a significant challenge in the coal preparation industry because it is hard to achieve efficient solid–liquid separation. While traditional coagulants and flocculants often suffer from limited bridging capabilities and distinct pH sensitivity, novel molecular architectures offer potential solutions. In this study, a star-shaped inorganic–organic hybrid flocculant (Al-PAM) was synthesized via in situ polymerization. Its flocculation performance and interfacial adsorption mechanism on the specifically targeted aluminol basal plane of kaolinite were systematically investigated and compared with Polyaluminum Chloride (PAC), Non-ionic Polyacrylamide (NPAM), and their combination (PAC + NPAM). Settling tests revealed that Al-PAM exhibited superior performance at a significantly lower dosage (10 mg∙L−1) compared to the PAC + NPAM binary reagent system. It achieved a rapid initial settling velocity and reduced the supernatant turbidity to 48.45 NTU, while maintaining a near-neutral pH favorable for water recycling. Furthermore, Quartz Crystal Microbalance with Dissipation (QCM-D) monitoring confirmed that Al-PAM forms a thick, viscoelastic, and irreversible adsorption layer on the Al2O3 substrate. The dissipation shifts (ΔD) revealed that the star-shaped architecture promotes distinct bridging and electrostatic adsorption, overcoming the limitation of linear polymers. This work elucidates the specific contribution of the alumina-surface interaction with flocculants and proposes an efficient strategy for treating refractory coal slime water.
Chang et al. (Thu,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: