Tracking Control of a Piezoceramic Actuator With Hysteresis Compensation Using Inverse Preisach Model

This paper presents the classical Preisach hysteresis modeling and tracking control of a curved pre-stressed piezoceramic patch actuator system with severe hysteresis. The actuator is also flexible with very small inherent damping. It has potential applications in active antennas. A series of tests are conducted to study the hysteresis properties of the piezoceramic actuator system. The numerical expressions of the classical Preisach model for different input variations are presented. The classical Preisach model is applied to simulate the static hysteresis behavior of the system. Higher order hysteresis reversal curves predicted by the classical Preisach model are verified experimentally. The good agreement found between the measured and predicted curves showed that the classical Preisach model is an effective mean for modeling the hysteresis of the piezoceramic actuator system. Subsequently, the inverse classical Preisach model is established and applied to cancel the hysteresis the piezoceramic actuator system for the real-time microposition tracking control. In order to improve the control accuracy and to increase damping of the actuator system, a cascaded PD/lead-lag feedback controller is designed with consideration of the dynamics of the actuator. In the experiments, two cases are considered, control with major loop hysteresis compensation, and control with minor loop hysteresis compensation. Experimental results show that RMS tracking errors are reduced by 50% to 70% if the hysteresis compensation is added in the feedforward path in both cases. Therefore, hysteresis compensation with the feedback controller greatly improves the tracking control accuracy of the piezoceramic actuator.