Silicon carbide (SiC) is widely utilized in semiconductors, microelectronics, optoelectronics, and other advanced technologies. However, its inherent characteristics, such as its hardness, brittleness, and high chemical stability, limit the processing efficiency and application of SiC wafers. This study explores the use of plasma etching as a pre-treatment step before chemical mechanical polishing (CMP) to enhance the material removal rate and improve CMP efficiency. Experiments were designed based on the Taguchi method to investigate the etching rate of plasma under various processing parameters, including applied power, nozzle-to-substrate distance, and etching time. The experimental results indicate that the etching rate is directly proportional to the applied power and increases with nozzle-to-substrate distance within 3–5 mm, while it is independent of etching time. A maximum etching rate of 5.99 μm/min is achieved under optimal conditions. And the etching mechanism and microstructural changes in SiC during plasma etching were analyzed using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), white light interferometry, and ultra-depth-of-field microscopy. XPS confirmed the formation of a softened SiO2 layer, which reduces hardness and enhances CMP efficiency; SEM revealed that etching pits form in relation to distance; and white light interferometry demonstrated that etching causes a smooth surface to become rough. Additionally, surface defects resulting from the etching process were analyzed to reveal the underlying reaction mechanism.
Shen et al. (Wed,) studied this question.