Abstract In the solar reflective band, the on-board calibration method based on a solar diffuser (SD) is the mainstream calibration method. However, the calibration accuracy is limited by the measurement accuracy of the SD bidirectional reflectance distribution function (BRDF) in the laboratory. The limitations of the light sources and detectors hinder accurate BRDF measurements in the short-wave infrared band, particularly beyond 1700 nm. In this study, the angle integration-band crossing transfer (AIBCT) method is proposed for SD BRDF measurement to avoid the influence of the Fourier spectrometer's signal processing and detector nonlinearity in the absolute measurement. The method utilized the relationship between the BRDF and directional-hemispherical reflectance, and calculated the spectral distribution of the SD BRDF at the standard in-plane geometry with an 0° incidence zenith angle and a 45° reflection zenith angle (0:45) by integration. The absolute measurement result of the 0:45 SD BRDF at 1150 nm was used as the standard for transfer to the short-wave infrared band. The SD BRDF at 0:45 was generalized to other geometries through relative measurements based on the reciprocity theorem. The mean relative error of the results of the AIBCT and absolute measurement methods was less than 0.3 % in the range of 1100 nm to 1600 nm. Analysis of the results showed that the AIBCT method’s measurement uncertainty (coverage factor k = 2) of the 0:45 SD BRDF is better than 0.84 % at 1100 nm to 2300 nm and 1.05 % at 2300 nm to 2500 nm. Furthermore, the AIBCT method was found suitable for the ultraviolet band.
Zhang et al. (Tue,) studied this question.