Nitrile rubber (NBR) exhibits excellent oil resistance, wear resistance, gas barrier properties, and mechanical properties. On the other hand, lignin, a by-product of the pulp and paper industry, can serve as an ideal substitute for carbon black as a reinforcing agent for rubber. However, when NBR is directly compounded with lignin, direct compounding fails to achieve the desired reinforcing effect due to poor dispersion of lignin in the NBR matrix and poor compatibility with the NBR phase. In this paper, carboxyl groups were introduced via cyano group hydrolysis. By controlling the hydrolysis time, we successfully prepared two types of carboxylated NBR with different carboxyl contents. Subsequently, the carboxylated NBR was processed into lignin/NBR composites via dry blending. The results indicated that the introduction of carboxyl groups endowed NBR with higher polarity and reactivity, significantly enhancing the interfacial compatibility between lignin and the rubber matrix. The mechanical properties of the composite were greatly improved, with the mechanical strength increasing from 4.5 MPa without carboxyl groups to 13.8 MPa with high carboxyl content. The good dispersion of lignin also significantly improved the thermal stability of the composite. The carboxylation modification strategy of NBR provides a new approach for preparing high-performance NBR/biomass composites.
Zheng et al. (Thu,) studied this question.