Additive manufacturing (AM) enables the production of complex components but often results in poor surface quality due to its layer-by-layer deposition process. To improve surface finish, postprocessing methods like abrasive flow machining (AFM) are necessary. However, conventional AFM struggles with achieving uniform polishing in intricate regions, especially at internal corners. This study proposes a liquid metal-driven abrasive flow (LM-AF) strategy designed for polishing complex internal channels in AM parts. By combining experimental and numerical simulations, the research investigates surface roughness variations, particularly focusing on the Sa (Arithmetic Average Surface Roughness) parameter. Experimental results show that conventional AFM leaves significant roughness at internal corners compared to adjacent areas. To address this, a hybrid GA-NN-GA (Genetic Algorithm–Neural Network-Genetic Algorithm) optimization model was developed. The model uses a neural network to predict Sa based on key parameters, with genetic algorithms applied for training and optimization. The optimal process parameters identified include a NaOH concentration of 1 mol/L, a voltage of 50 V, abrasive concentration of 10%, and a frequency of 428.3 Hz. With these parameters, LM-AF significantly reduced roughness at internal corners of flow channels, achieving uniformity with Sa values reduced from 25.365 μm to 15.780 μm, from 22.950 μm to 15.718 μm, and from 10.933 μm to 10.055 μm, outperforming traditional AFM methods.
Ma et al. (Thu,) studied this question.