Key points are not available for this paper at this time.
The (electro)chemical stability of undoped and Zn-doped 0.94Na1/2Bi1/2TiO3–0.06BaTiO3 lead-free piezoceramics (NBT–6BT) was studied. For this purpose, the Fermi level at the interface between NBT–6BT and Sn-doped In2O3 (ITO) electrode is varied by gradually reducing the ITO film either by annealing in vacuum or by applying a voltage across a Pt/NBT–6BT/ITO. The chemical and electronic changes are monitored in situ by x-ray photoelectron spectroscopy. The experiments reveal the formation of metallic Bi when the Fermi level is reaching a value of 2.23 ± 0.10 eV above the valence band maximum, while no reduction of Ti is observed. The electrochemical reduction of Bi constitutes an upper limit of the Fermi level at ≈1 eV below the conduction band minimum. High electron concentrations in the conduction band and a contribution of free electrons to the electrical conductivity of NBT–6BT can, therefore, be excluded. The reduction occurs for an ITO work function of 4.2–4.3 eV. As typical electrode materials such as Ag, Cu, Ni, or Pt have higher work functions, an electrochemical instability of the electrode interfaces in ceramic capacitors is not expected. Under the given experimental conditions (350 °C, electric fields 40 V/mm), no degradation of resistance and no enrichment of Na at the interface are observed.
Hu et al. (2024) studied this question.