Tooth Surface Deviation Analysis for Continuous Generation Grinding of Internal Gears

In order to resolve the issues of low efficiency and poor precision in the traditional finishing process of hardened internal gears, a method is proposed for calculating the profile curves of a drum-shaped grinding tool suitable for mass finishing of hardened internal gears. Additionally, the impact of drum-shaped grinding tool installation errors on the tooth surface deviation of internal gears is analyzed. Firstly, the processing principle for the generation grinding of internal gears by the drum-shaped grinding tool is introduced. Based on differential geometry, meshing theory, and two-degree-of-freedom enveloping method, a mathematical model is developed for the generation grinding of internal gears. Profile curves of the drum-shaped grinding tool are obtained by solving the meshing equation between the drum-shaped grinding tool and the internal gear. Then, the tooth surface equation for the internal gear is derived in the presence of drum-shaped grinding tool installation errors. By discretizing the error tooth surface of the internal gear, the average normal deviation of the tooth surface is calculated. In the end, the distribution of normal deviation on the tooth surface of the internal gear with different drum-shaped grinding tool installation errors is acquired, and the influence of four kinds of installation errors on the tooth surface of the internal gear is analyzed. The sensitive direction is identified for drum-shaped grinding tool installation errors on the tooth surface of the internal gear. Consequently, this research provides a calculation method for the drum-shaped grinding tool fit for high-precision and high-efficiency finishing of mass-produced hardened internal gear and offers a reference for correcting deviation in the tooth surface of internal gear with installation errors of the drum-shaped grinding tool.