Key points are not available for this paper at this time.
Due to prolonged human occupancy within indoor environments, the quality of indoor air holds significant importance. This study evaluates the impact of retrofitting a ventilation system from natural to mechanical on indoor air quality (IAQ) in a bedroom during heating seasons in 2017/18 and 2020/21. Measurements were conducted before and after modernization to assess CO2 concentrations, temperature, humidity, particulate matter (PM) and bacterial and fungal aerosols levels indoors and outdoors. Results show a significant decrease in CO2 concentration (from 1000 ± 240 ppm to 806 ± 165 ppm) and relative humidity (from 53.0 ± 3.6 % to 28.2 ± 4.1 %) post-modernization. Notable reduction in CO2 concentrations averaging 20 % was recorded, thereby elevating air quality category from IDAIII to IDAII. Additionally, the study determined the infiltration coefficient for PM2.5, which increased from 0.48 under natural ventilation to 0.63 after retrofitting. PM2.5 concentrations increased indoors (from 23.49 ± 11.21 μg/m3 to 56.68 ± 13.47 μg/m3) due to higher infiltration rates with mechanical ventilation. Bioaerosol measurements indicate fluctuating concentrations, with bacterial aerosols peaking in the evening. The use of mechanical ventilation led to increased transport and dispersion of bacterial bioaerosols indoors. In contrast, this was not observed for fungal aerosols. Additionally, the study highlights limitations in ventilation filtration efficiency and recommends the installation of PM2.5 sensors to regulate airflow during periods of high outdoor PM2.5 concentrations. Overall, while mechanical ventilation improved some IAQ parameters, it posed challenges in controlling particulate matter infiltration, emphasizing the need for comprehensive ventilation strategies to ensure indoor air quality and occupants' well-being.
Mucha et al. (Tue,) studied this question.