Key points are not available for this paper at this time.
Abstract To address the issue of easy shearing damage of Carbon Fiber Reinforced Polymer (CFRP) in enhancing the axial compressive performance of CFRP and Ultra‐High‐Performance Concrete (UHPC) strengthened concrete columns, two methods, prestressed CFRP and UHPC with spiral stirrups, were employed for composite strengthening of reinforced concrete (RC) columns. A total of one unstrengthened column and eight strengthened columns were designed and fabricated to validate the effectiveness of the proposed methods. The axial compressive performance and bearing capacity of each specimen were analyzed by considering parameters such as single or composite strengthening method, presence of spiral stirrups in UHPC, and application of pre‐stressed CFRP. The results show that, compared with any single strengthened specimen, the ultimate bearing capacity of the composite strengthened specimen is greater than the sum of the corresponding single strengthened specimens, and the bearing capacity of the prestressed CFRP with spiral stirrup UHPC composite strengthened specimen is the most significant, reaching 235.63%. By incorporating spiral stirrups in the UHPC jacket, the phenomenon of uneven fragmentation during the failure of the strengthened column is improved. This helps prevent premature shearing damage of CFRP and enhances the fracture strain and effective utilization of CFRP. Additionally, prestressed CFRP effectively restrains the lateral deformation and crack development of the core concrete in the UHPC jacket, fully utilizing the high compressive strength of UHPC. This further enhances the ultimate bearing capacity and ductility of the specimens. Based on the experimental phenomena and strain of each material, the failure mechanism of prestressed CFRP‐spiral reinforced UHPC composite‐strengthened columns is proposed. Finally, a unified bearing capacity calculation formula for single and composite strengthened columns is established, based on the theory of confined concrete strength and the assumption of strength increment superposition. The formula is validated with experimental results from relevant literature, showing small errors in the calculated results and indicating good applicability of the formula.
Wang et al. (Tue,) studied this question.